HDSentinel Light detect only 1 disk

Post here if you encounter any problems or bugs with the software.
dancer_69
Posts: 3
Joined: 2019.07.02. 04:21

HDSentinel Light detect only 1 disk

Post by dancer_69 »

Hello,
I just tried HDSentinel Light, and it detects only 1 disk. I have 4 disks and it detects only sdc. If I run the HDSentinel from command line, then all disks detected.
Is this a limitation of gui or a bug?
User avatar
hdsentinel
Site Admin
Posts: 3010
Joined: 2008.07.27. 17:00
Location: Hungary
Contact:

Re: HDSentinel Light detect only 1 disk

Post by hdsentinel »

It is currently a limitation, as described on the page of the Linux GUI:

https://www.hdsentinel.com/hard_disk_se ... ux_gui.php

"The following packages install Hard Disk Sentinel Linux version with a graphical user interface showing the status of the first hard disk/SSD (usually where Linux installed) in a window."

Hopefully soon it will possible to display all disks ;)
dancer_69
Posts: 3
Joined: 2019.07.02. 04:21

Re: HDSentinel Light detect only 1 disk

Post by dancer_69 »

Thanks for the quick reply. I missed that. I used a direct download, so I didn't visit that page and missed it.
Thanks again.
dancer_69
Posts: 3
Joined: 2019.07.02. 04:21

Re: HDSentinel Light detect only 1 disk

Post by dancer_69 »

Ok then. Thanks!
Post Reply