Installation instructions

Any new ideas, possible impromevents for future versions.
Mits
Posts: 4
Joined: 2008.11.04. 09:13

Installation instructions

Post by Mits »

I think it would be nice if you included some installation and initial instructions for newbies like me who are not familiar with packages not existing in the distribution repositories. I had to do the following to make it run on my Xubuntu 8.04 spare box:

1. with my filemanager I double-clicked the gzip and decompressed it somewhere (I used my home dir)

2. I changed the file's permissions to make it executable from a terminal using

Code: Select all

chmod 755 HDSentinel
3. I ran the executable with

Code: Select all

sudo ./HDSentinel <options>
... and I saw a very disturbing report: Health 64%, Estimated lifetime 64 days !!!
Needless to say I'm now in panic mode :(
User avatar
hdsentinel
Site Admin
Posts: 3128
Joined: 2008.07.27. 17:00
Location: Hungary
Contact:

Re: Installation instructions

Post by hdsentinel »

Thank you very much for your thoughts!
You're correct: the installation instructions were missing. Now I fixed this, I added these lines to the Linux page.
Of course sudo is not required if the user logged in as root.
User avatar
hdsentinel
Site Admin
Posts: 3128
Joined: 2008.07.27. 17:00
Location: Hungary
Contact:

Re: Installation instructions

Post by hdsentinel »

Mits wrote: ... and I saw a very disturbing report: Health 64%, Estimated lifetime 64 days !!!
Needless to say I'm now in panic mode :(
It is really not perfect ....
If possible, please save a report with using -R switch. If you can send me a such report, I'll analyse it to check the real situation.
I recommend to check the status periodically to make sure the status is not perfect but stable.
If new problems will appear (and the health will decrease) I recommend an immediate backup before continuing the use of this disk.
TheEvilDot
Posts: 7
Joined: 2009.07.30. 15:07

Re: Installation instructions

Post by TheEvilDot »

Some installation additions when you are on a console only system.

#Download the latest hdsentinel archive using wget that comes with most Linux distros.

Code: Select all

wget http://www.hdsentinel.com/hdslin/hdsentinel.gz

#Unpack the archive.

Code: Select all

$gunzip -d hdsentinel.gz
#Change file permissions to make it executable.

Code: Select all

$chmod 755 hdsentinel 

#Optional, rename to HDSentinel (to keep the creator happy ;) )

Code: Select all

mv hdsentinel HDSentinel
If you run into trouble on a 64-Bit installation check out this thread
firionicable
Posts: 20
Joined: 2012.10.09. 04:03

Re: Installation instructions

Post by firionicable »

It looks like everything is already available. Nice.
Post Reply