Does not start: Entry point not found under NT 4.0

Post here if you encounter any problems or bugs with the software.
Cypheros
Posts: 1
Joined: 2016.10.25. 11:37

Does not start: Entry point not found under NT 4.0

Post by Cypheros »

Get this message under Windows NT 4.00.1381 .

HDSentinel.exe - Entry Point Not Found
The procedure entry point GetLastInputInfo could not be located in the dynamic link library user32.dll.
User avatar
hdsentinel
Site Admin
Posts: 3010
Joined: 2008.07.27. 17:00
Location: Hungary
Contact:

Re: Does not start: Entry point not found under NT 4.0

Post by hdsentinel »

Thank you very much for your attention about Windows NT4 and excuse me for the troubles.

Personally I feel the highest compatibility (even with older OSes) is very important and I maintaned this for very long time. With the latest version yes, I added some functions which may not work on NT4 and Win98 as I thought these OSes are no longer used and may be phased out.
But it seems these OSes still need to be supported and maintaned.

I'd recommend to try installing one of the older versions.
The trial of these versions are still available on the bottom of the Downloads page: www.hdsentinel.com/downloads.php

For example, version 4.50
http://www.hdsentinel.com/hdsentinel_pro_setup450.zip

should work, I just verified that version with Windows NT4.
Post Reply