hello,
considering purchasing usb3/3.1 cloning/docking station.
prefer (marked with *) usb3.0 + uasp or usb 3.1 device. information gathered from webpages and user manuals.
which of the following models (available in my area) are supported by the hdsentinel?
#Akasa DuoDock x2 (AK-DK06U3)
http://www.akasa.com.tw/update.php?tpl= ... =AK-DK06U3
#Logilink QuickPort QP0010
http://www.logilink.eu/Products_LogiLin ... l_SATA.htm
chipset: JMS561U >> uasp?
#Orico 6629US3-C-BK
http://www.orico.cc/goods.php?id=4836
#Orico 6828US3-C
http://www.orico.cc/goods.php?id=4998
#RaidSonic IB-121CL-6G*
http://www.raidsonic.de/products/extern ... ectID=2655
uasp
#RaidSonic IB-121CL-C31*
https://www.raidsonic.de/products/exter ... ectID=4693
Chipset: ASM1352R + ASM1543
USB 3.1
#RaidSonic IB-123CL-U3*
https://www.raidsonic.de/products/exter ... ectID=3133
uasp
#Unitek Y-3026*
https://www.unitek-products.com/product ... uct&id=213
chipset: JMS561U
uasp
#Unitek Y-3027
https://www.unitek-products.com/product ... uct&id=214
USB 3.1
USB 3.0/3.1 docking/cloning station
-
hdsentinel
- Site Admin
- Posts: 3128
- Joined: 2008.07.27. 17:00
- Location: Hungary
- Contact:
Re: USB 3.0/3.1 docking/cloning station
Good question, hopefully users of any of these enclosures can confirm if they work - or not. Personally I did not check these.
In theory, there should be no problem with any of them: both JMicron chips and other chipsets (for example ASMEDIA) should work, complete status should be detected and reported. But there may be some firmware issue with different chipsets (for example JMicron), so you may ask the manufacturer of the enclosure for confirmation.
Please check Support -> Compatibility -> External disks, enclosures page, it shows list of devices tested by me or reported by users.
When users send information (positive or negative results), the corresponding device is added to the list.
I always encourage users to send mail (or developer report) with the device name, so then I can add to the list of compatible devices. This helps users to select proper devices.
Personally I use the following dual docking stations with good experiences and 100% compatibility:
EWENT EW7014 USB 3.1
STARTECH SDOCK2U313R
ICY BOX IB-120CL-U3
NEXT 943DCU3
COLTECH CE-912HU3
Highpoint RocketStor SMART Backup
In theory, there should be no problem with any of them: both JMicron chips and other chipsets (for example ASMEDIA) should work, complete status should be detected and reported. But there may be some firmware issue with different chipsets (for example JMicron), so you may ask the manufacturer of the enclosure for confirmation.
Please check Support -> Compatibility -> External disks, enclosures page, it shows list of devices tested by me or reported by users.
When users send information (positive or negative results), the corresponding device is added to the list.
I always encourage users to send mail (or developer report) with the device name, so then I can add to the list of compatible devices. This helps users to select proper devices.
Personally I use the following dual docking stations with good experiences and 100% compatibility:
EWENT EW7014 USB 3.1
STARTECH SDOCK2U313R
ICY BOX IB-120CL-U3
NEXT 943DCU3
COLTECH CE-912HU3
Highpoint RocketStor SMART Backup