Page 1 of 1

Show temperature overheat in email subject

PostPosted: 2021.02.26. 09:30
by Virgil
I often receive an email notification from Hard Disk Sentinel when there is a temperature overheat. It would be useful to add to the email subject line the disk number and overheat current temperature so that I wouldn't have to open the email and scroll through to where the overheat temperature is reported.

Re: Show temperature overheat in email subject

PostPosted: 2021.02.26. 15:50
by hdsentinel
Thanks for your tip. While the subject does not contain the disk number (because more drives can trigger the alert) you can customize the alert and configure to

- include a problem overview in the beginning of the e-mail alerts
- send alert ONLY about affected disk drive(s)

So there would be no need to scroll down anything - as then you'll immediately see only the affected disk drive(s) and/or a quick overview about which drive(s) triggered the alert.

Please open Configuration -> Message Settings page in latest Hard Disk Sentinel version and there you can use the

Include problem overview in alerts

and

Alert about problematic drive(s) only

options. Maybe these can help ;)

Re: Show temperature overheat in email subject

PostPosted: 2021.03.01. 21:28
by Virgil
Thank you for the information. The problem overview setting is completely satisfactory for me.