CPU usage 100% due HDSentinel

Post here if you encounter any problems or bugs with the software.

CPU usage 100% due HDSentinel

Postby evvivame » 2022.01.27. 23:43

Hi,
Happy 2022 !

I see this issue on two PC with:
1) different Hardware
2) different O.S. ( 1 x Windows 10 LTSC & 1x Windows 7 Enterprise
3) same HDSentinel vers. 5.70 PRO

Other info:
a) the issue occured RANDOM
b) When the end user call me due slow response time of the PC, is enough kill HDS. If I restart immediately HDS the CPU usage BACK NORMAL (see point 1. on the attached) !

Some little suggestion ?
Thanks !
Luciano
Attachments
CPU.jpg
CPU.jpg (153.97 KiB) Viewed 244 times
evvivame
 
Posts: 14
Joined: 2008.11.07. 13:05

Re: CPU usage 100% due HDSentinel

Postby hdsentinel » 2022.01.28. 15:41

Thanks for the image and the details!

Sounds so interesting. Generally this should never happen of course becuse Hard Disk Sentinel (between the detection cycles) is just waiting, without performing any actions.
So (assuming that the detection frequency is the default 5 minutes), Hard Disk Sentinel is performing status detection only for a very short period (eg. 1 second or so) and for 4 minutes 59 seconds it is just waiting. There is nothing which can indicate/cause 100% CPU use.

One user reported similar - due to a failed Windows update and after the Windows update restarted and the system finished a reboot cycle, there were no further issues.

If you'll see next time, the best would be to (before terminating Hard Disk Sentinel) use Report menu -> Send test report to developer option - as it may give some ideas, thoughts.
Also if Hard Disk Sentinel closed, I recommend to please check the folder of the software and investigate which files modified just before terminating (eg. LOG.TXT) and send them in e-mail to info (at) hdsentinel (dot) com
This may give some ideas, thoughts about what happen on the actual system.
User avatar
hdsentinel
Site Admin
 
Posts: 2720
Joined: 2008.07.27. 17:00
Location: Hungary


Return to Bug Reports

Who is online

Users browsing this forum: No registered users