Disk Performance tab fails to update when more than 1 partition exists

Post here if you encounter any problems or bugs with the software.
Edilson
Posts: 1
Joined: 2023.09.23. 16:42

Disk Performance tab fails to update when more than 1 partition exists

Post by Edilson »

HDS 6.10 fails to update the 'Disk Performance' tab when more than 1 partition exists.
I observed this behaviour when I attached disks from a windows installation,
then my pc gives letters to 'System Reserved' and main partition.

Several disks resulted in the same behaviour.

I am using Windows 10 Pro 22H2 build 19045.3513
User avatar
hdsentinel
Site Admin
Posts: 3021
Joined: 2008.07.27. 17:00
Location: Hungary
Contact:

Re: Disk Performance tab fails to update when more than 1 partition exists

Post by hdsentinel »

Thanks for your message. Sorry for the troubles, but I can confirm that the number of partitions surely never cause troubles with the "Disk Performance" tab: the partition(s) on the drive are completely independent from the real-time performance monitoring. It is not relevant if the drive has 1 or more partitions.

If you encounter problems with the performance monitoring, then probably the Windows performance counter objects damaged.
This is fortunately more rare these days (was more common with older Windows versions) and the

https://www.hdsentinel.com/faq.php#perf

page explains the situation, gives details about what to check, which commands can be useful to repair / enable the performance monitoring in general.

In addition, I suggest to use Report menu -> Send test report to developer option, as then it is possible to check the actual situation, it may give some ideas, thoughts about what happens and if there is anything to do.
Post Reply