Export custom temp thresholds when backing up the configuration
Export custom temp thresholds when backing up the configuration
Can you please make it so it also exports the custom temperature thresholds when we backup the configuration? I've been losing multiple times the config now, it wont be such an annoyance if I wouldn't have to go through the HDDs/SSDs info sheets to find out their max temps. Or maybe add an option to enable this config if you don't want to make it the default.
-
hdsentinel
- Site Admin
- Posts: 3021
- Joined: 2008.07.27. 17:00
- Location: Hungary
- Contact:
Re: Export custom temp thresholds when backing up the configuration
I double checked just to be sure: I can confirm that the custom temperature thresholds are saved and restored properly: the Configuration -> Update -> Backup Configuration function saves these values and the Restore Configuration restores them.
It is possible that the values are not automatically used, just after a restart: I suggest to check what happens (after restoring the configuration) if you completely close by File -> Exit and restart Hard Disk Sentinel. Then the previously configured custom temperature thresholds should be immediately available.
It is possible that the values are not automatically used, just after a restart: I suggest to check what happens (after restoring the configuration) if you completely close by File -> Exit and restart Hard Disk Sentinel. Then the previously configured custom temperature thresholds should be immediately available.