Ability to set individual temperature thresholds for drives

Any new ideas, possible impromevents for future versions.

Ability to set individual temperature thresholds for drives

Postby dr0 » 2019.08.31. 18:44

Hello. For HDDs recommended operating temperature is much lower, whereas SSDs, especially NVMe, can run much hotter, and that is usually considered to be normal. It would be nice if we had a chance to set individual thresholds for each drive.
dr0
 
Posts: 11
Joined: 2018.01.01. 02:05

Re: Ability to set individual temperature thresholds for dri

Postby hdsentinel » 2019.09.03. 09:45

Of course this is possible for many years.
Please open the Temperature page of any disk drive (hard disk or SSD) and in the upper right corner, there is an option
"Set custom temperature thresholds".
By that, you can configure different yellow/red (warning/alert) temperature thresholds for the hard disk / SSD.

You can have different thresholds for any (even all) disk drives.

Please check the Help, it also describes the custom temperature thresholds:
https://www.hdsentinel.com/help/en/11_temperature.html
User avatar
hdsentinel
Site Admin
 
Posts: 2232
Joined: 2008.07.27. 17:00
Location: Hungary

Re: Ability to set individual temperature thresholds for dri

Postby dr0 » 2019.09.03. 12:35

Oh, sorry, I didn't know that it was already possible. Thanks for pointing that out.
dr0
 
Posts: 11
Joined: 2018.01.01. 02:05

Re: Ability to set individual temperature thresholds for dri

Postby tired » 2019.10.19. 17:35

I came here to make the same request--I looked in the application but did not see a way to do this. I was looking in the main program options (Configuration > Thresholds / Tray Icon), because that is what made sense to me.
tired
 
Posts: 7
Joined: 2019.05.11. 06:45

Re: Ability to set individual temperature thresholds for dri

Postby hdsentinel » 2019.10.21. 06:47

Please see above, it is already available for long time ;)
Yes, there you can configure the GLOBAL temperature thresholds.

And as I wrote, it is possible to configure individual thresholds if you select the particular disk drive and (as I wrote)

Please open the Temperature page of any disk drive (hard disk or SSD) and in the upper right corner, there is an option
"Set custom temperature thresholds".


By that, you can configure different yellow/red (warning/alert) temperature thresholds for the hard disk / SSD.
User avatar
hdsentinel
Site Admin
 
Posts: 2232
Joined: 2008.07.27. 17:00
Location: Hungary


Return to Feature Requests

Who is online

Users browsing this forum: No registered users